Installation guide

Installing 14-Slot Shelf Components

Chapter 5

If loading one DIMM pair only, begin by loading the selected DIMM into DIMM socket U12 first. This will

ease the installation of the second DIMM into DIMM socket U5.

If you are populating all four DIMM sockets, load DIMM socket U17 first. Load DIMM socket U15 next before

loading DIMM socket U12 and finish by loading DIMM socket U5 last.

Step 1. Angle a selected DIMM over an empty DIMM socket.

Step 2. Correctly orient the key and press down evenly to seat the DIMM into the socket.

Step 3. The DIMM socket levers will rise to secure the DIMM. Pull each lever against the side of the DIMM

to ensure it is seated.

Step 4. Repeat steps 1 through 3 to load the remaining DIMM(s).

Step 5. Reinstall the Server Blade access cover. Fasten the cover with the screws retained earlier.

This completes the DIMM replacement procedure.