Installation guide

Installing 14-Slot Shelf Components
Installing 14-Slot Shelf Components
Chapter 5
45
CAUTION The DIMMs must be replaced in pairs. Each individual DIMM must be identical in storage
capacity, revision, and part number. The current DIMM configurations supported by HP
include any of the following:
• Two 1–GB DIMMs (2 GB)
• Four 1–GB DIMMs (4 GB)
• Two 2–GB DIMMs (4 GB)
• Four 2–GB DIMMs (8 GB)
IMPORTANT DIMM sockets U5 and U12 are always populated. See Figure 5-3.
Figure 5-3 DIMM Socket Assignments