Installation guide

Connecting Protective Earth Ground and External Power to the Shelf
Connecting Protective Earth Ground and External Power to the Shelf
Chapter 4
39
Figure 4-5 Typical PEM Power Cable Connection Layout
Step 4. On PEM B, replace and secure the PEM B terminal block cover.
WARNING When external power is applied, the 14-Slot Shelf is energized at all times.
Power to the 14-Slot Shelf is controlled only from the external power
source, and cannot be switched off at the 14-Slot Shelf. Failure to observe
can result in personal injury.
Step 5. The 14-Slot Shelf is now ready to receive system power.