Installation guide

Rack Mounting the 14-Slot Shelf

Chapter 3

Figure 3-6Flange Mounting Positions for 2- and 4-Post Equipment Racks

Step 2. Slide each flange downward until the flange drops out of the five retaining clips that hold the

flanges to the side panels.

Step 3. Reposition each flange over the five retaining clips for the 2-post mounting position (Figure 3-6),

with the clips protruding into the openings in the flange.

Step 4. Slide each flange upward until the flanges are securely seated under the retaining clips.

NOTE The rack mounting flanges remain vertical for the 2-post rack mount. They are

positioned approximately 5 in. behind the 4-post mount location of the shelf. See

Figure 3-6.

Step 5. On the 14-Slot Shelf, secure the flange at the upper screw holes using the two screws removed from

the bottom of the flange of the 4-post mounting position. Repeat steps 1—5 for other side flange.

Shelf Front