Installation guide

Rack Mounting the 14-Slot Shelf

Chapter 3

Rack Mounting the 14-Slot Shelf

The HP bh5700 ATCA 14-Slot Blade Server is designed to mount in a 19 in. (48.26 cm) wide, 23.62 in (600

mm) deep, Electronics Industry Alliance (EIA), seismic-rated HP rack. The 14-Slot Shelf is shipped with the

rack mounting flanges correctly positioned for mounting into a 4-post seismic-rated equipment rack. This

chapter provides detailed procedures for completing the rack mount installation.

Installing the 14-Slot Shelf in a HP EIA Standard Seismic Rack

The ATCA 14-Slot Shelf 600 mm EIA Seismic Rack Mount Kit provided with your HP Seismic Rack includes

all items required to mount the HP bh5700 ATCA 14-Slot Blade Server into the rack. See Table 3-1 for the

contents of the Rack Mount Kit.

NOTE The rear hold-down brackets (#3, Figure 3-1) are not included with this product release.

Table 3-1 Rack Mount Kit, HP bh5700 ATCA 14-Slot Blade Server, (PN

Z7678-60275)

Item Reference Description

#1, Figure 3-1 Mounting Slide, Rack Left Side (PN Z7678-00290), 1 each

#2, Figure 3-1 Mounting Slide, Rack Right Side (PN Z7678-00301), 1 each

#3, Figure 3-1 Rear Hold-down bracket, (PN Z7678-00291), 2 each (not

included in this release)

#4, Figure 3-1

#5, Figure 3-1

#6, Figure 3-1

Hardware Kit (PN Z7678-80075), 1 each

Nut clip, M5x0.8, 16 each

Screw, M5x0.8x16 Torx pan with crest cup washer, 16 each

Screw, M5x0.8x10 Torx pan with crest cup washer, 4 each