Manual

．．
User / Install Manual
Model 2003
180 Degree Commercial High Definition
Switchable Analog / Digital Camera
Features:
The 2003 High Definition 720P camera is capable of working with standard
CVBS (analog) Monitors and today's advance AHD High Definition Monitors.
Operation:
The 2003 is set to CVBS (Analog) by default. No adjustment is needed for most monitors.
If using the 2003 with a monitor that supports AHD high definition cameras follow
the instructions below to set the camera to this mode.
1: With the 4 Pin HD Connector disconnected, remove the black jumper from the
Green loop at the plug (shown below).
2: Re-connect the 4 Pin HD Connector to the monitor cable. Be sure to slide the protection
boot over the loop, jumper, and screw lock connector.
3: Save the jumper connector incase you with to switch the camera back to CVBS mode.
To do this disconnect the camera, slide the jumper connector back on the pins, and then
re-connect the 4 Pin HD Connector to the monitor cable.