Zsight iOS User Manual ZMODO Zsight iOS User Manual -----------------------------------------------------------------------------------------------------------------------------
Zsight iOS User Manual Contents 1 Software Installation........................................................................................................................ 3 1.1 Product Introduction.............................................................................................................3 1.2 Environment Requirements.................................................................................................. 3 1.3 Installation Steps...............................................
Zsight iOS User Manual 1 Software Installation 1.1 Product Introduction As IP Camera, DVR, NVR are further applied in security and monitoring industry, more users need one mobile monitoring software to contribute to their daily work. ZMODO invented Zsight software to receive real-time video from ZMODO DVR or IP camera. This user manualmainly describes how to install and operate the software. 1.2 Environment Requirements Hardware: iPhone v4.3 up or iPod touch System: iOS4.3 or up 1.
Zsight iOS User Manual Procedure Start Interface Device List Interface
Zsight iOS User Manual 2.2 Device Management 2.2.1 Add Device There are mainly two ways to add device: manually and autoadd. First Way: Manually Click [Add] tab on the upper right corner of title bar to add device, and fill relevant info.
Zsight iOS User Manual Device Info Interface ID: Refer to the ten-digit number. There are two ways to get the ID: 1) put the cursor to ID location to manually fill in; 2) click and scan QR Code with phone, then device will automatically entered to “Wi-Fi interface”( we will introduce how to set network parameter after scanning ID later in this manual) Name: Device name, with maximum 60 chars User: Login in or access device with user name; default user name is admin.
Zsight iOS User Manual Search Device Interface 2.2.2 Edit Device Click to edit device info, click [Done] tab to save or [Cancel] tab to discard. 2.2.
Zsight iOS User Manual Delete Device Interface 2.
Zsight iOS User Manual Wi-Fi Connection Click the desired Wi-Fi, then “Enter Password Interface” will be displayed: Enter Wi-Fi Password Interface Enter Wi-Fi password, click [Save] to complete Wi-Fi connect setting.
Zsight iOS User Manual 2.4 Video Display Click any device in “Device List” to enter to “Device Real-time Surveillance Interface” as Figure 2-13.
Zsight iOS User Manual Warning about Changing Password Click [Later] tab to change password later and [Yes] tab, then “Change Password Interface” will be displayed Change Login Password Interface Enter the new password, click [Save] tab when finished. Adjust phone horizontally or vertically to freely convert landscape and portrait mode.
Zsight iOS User Manual Portrait Mode 2.5 About You can refer to “About Interface” for software version and other info.
