How to Access IP Camera Instruction Manual

Chapter 3 Access to IP Camera on Zviewer PC
47
2. After either of the above operation, you will enter to “New Device Add Wizard” section (As Figure 22).
Click [Device by ID], click on the 10-digit Device ID (found from the label of the IP Camera) and click
[Next].
Figure 22
3. System shall automatically identify and add the values of “Max Channel”, “Login” and “Password”,
then click [Finish]. You will be prompted with “Add Device Successfully” after successfully adding it (As
Figure 23).
[Max Channel] Quantity of channels of the device
[Login] User name of the device, default is “admin”
[Password] Login password, default is “111111”
Figure 23