User manual

®
8
on front panel or remoter, or right clicking the mouse. Select user and input the corresponding password to
login.
Figure 1 Log in
Note1: Please allow the NVR up to 60 seconds to boot up completely.
Note2: The default password for the Admin username is 111111. The default password for the User
username is Admin. The admin password can be restored to factory default by connecting a metal
paper clip or small metal object to the terminals on the internal motherboard JP1 port. The admin user
can modify the user’s password after login. The system supports up to 16 users, the Admin is the
administrator user with all permissions, whose name cannot be deleted or changed. The Admin user
can add and delete all other users and the permissions corresponding.
Note3: Please follow the procedures to install the hard drive. “No Hard Drive” will prompt if you start up
the device without hard drive, please check the connection between NVR and hard drive if you installed
but still pop out "No hard drive" warnings.
2.2 Shortcut Menu
After login, right click the mouse, you will enter the shortcut menu, as gure 2 shows: