User manual

[Subnet mask]

Default: 255.255.255.0 (It is highly recommended not to change this section.)

[Gateway]

Set gateway IP of the NVR, for example if the NVR accesses the public network through the router,

the gateway IP need to be set as the router IP which has accessed the public network.

[DNS address]

If the user has a DDNS account, the DNS address needs to be set as DNS address of the

place where the device is belonging to.

Note: DNS parameters, MAC address and parameters of three ports have been congured in factory,

please do not change it randomly.

After setting parameters, click the

[Submit]

button, the setting will take effect immediately.

[PPPOE]:

Click into PPPOE Setting, as per gure 22 shows:

Figure 22

[ON]

Set to enable or disable the PPPOE dial-up function.

[Account]

The ADSL dial-up account, obtain from internet service provider.

[Password]

Password of ADSL dial-up account, obtain from internet service provider.

After setting all parameters, click the [Save] button, the setting will take effect immediately.

[DDNS]

Click into DDNS Setting as gure 23 shows:

Figure 23 DDNS Setting

Dynamic DNS setting allows the user to bond the device with a xed domain name if the user has a dynamic IP

address. The user may register for a free DNS service at

http://zmododns.com/

[ON]

Check to enable or disable the DDNS function.

[Server]

http://zmododns.com/ is highly recommended, as this DNS service is operated and maintained by

Zmodo.

[Domain]

The device domain which is set by user, such as mydvr.zmododns.com.