User manual

Figure 20

Following Features can be set::

[1] [Channel]

You can choose all to set four channels or set single one channel by selecting from CH01, CH02,

CH03, and CH04.

[2] [Type]

Three types of recording types to choose: Schedule recording, alarm triggered recording and motion

triggered recording.

[3] [Week/Time]

You can choose one day from Monday to Sunday, or choose everyday in the week. You must

also check the time period for you to choose. You need to click the time check to enable the time selection.

After setting parameters, click the

[Save]

button, the setting will take effect immediately.

2.3.3.4 Network Setting

Click to enter the Network Parameter conguration menu, as Figure 21 shows:

Figure 21

[DHCP]

If the router allows DHCP functionality, select DHCP. The IP Camera will obtain IP address

automatically from the router. If the router does not allow for DHCP functionality, then the IP address must be

obtained manually.

[IP address]

Set the wired cable IP address of the NVR. The factory setting IP is 192.168.0.10, network

segment is 192.168.0.1.