Instruction Manual

H.264 Super Digital Video Recorder User Manual
37
Update Period：The same with the NTP server check interval. Default: 10minutes.
【EMAIL setup】
If the alarm is turned on or the alarm linkage photos are taken, send an email about the alarm
information and the photos to appointed address.
Picture 4.10 EMAIL
SMTP server：For example, SMTP server address of 126 email is: smtp.126.com.
Port：Email server port number.
Need SSL：Decide whether using Secure Socket Layer protocol to login.
User Name：Apply the email server user name.
Password：Input the password corresponding to the user.
Sender：Set the email sender address.
Receiver：Send the email to appointed receivers when the alarm is turned on. You can set three
receivers at most, and each receiver separate by “;”( Semicolon + Space), receiver and sender can
use same email.
Title：The subject of the message, you can set your own.
【IP FILTER】
When choosing the white list, only the listed IP address can connect the DVR. The 64 IP addressed
are supportive in the list.
When choosing the black list, the listed IP address can not connect the DVR. The 64 IP addressed
are supportive in the list.
You can delete the set IP address by √ in the options.
Note：When the same IP address is in the white and black list at the same time, the black list
precedence is higher.