User manual

·WIFI setting

Figure 4-6 IPC WIFI network setting

[Whether to use WIFI] Select this check to open the wi network function of IPC.

[Whether to use DHCP] If the router allows DHCP function, select this type, IP

camera will obtain IP address automatically from router.

[IP address] Set wireless IP address of IP camera.

[subnet mask] Set IP address of the current wireless gateway( router/AP), such

as 192.168.0.1

[Hotspot adding] After switch to Wi setting, it will automatically search the

hotspot. When hotspot is searching; the name of the wireless router, signal

intensity, and the encryption will be listed on the screen. Click on “add hotspot”

or double click on an existing hotspot, open” wi hotspot setting” dialog box as

below gure shown: