User manual

®
26
[Version] Displays device name, system version, video/audio channel number,
sensor/alarm input/output, and local storage.
[Time Setting Switch] Enable this switch to manually set the system date and
time. If you choose to disable this switch, then the date and time will be
synchronized with the PC you are using to access the camera.
After setting all parameters, click the [Sync Time] button. The setting will take
effect immediately.
4.2.5 Advanced Setting
·User Management
Figure 4-17 User management interface
Each IP camera can be set up to have up to 15 users. The default super
user for the system is “admin.” This user cannot be deleted, but the
“admin” user password can be changed.
User Privileges are as follows:
Super-User or Root authority: Allows for operation and changing of ALL settings
in the IP Camera.
Common User or Ordinary User authority: The common user is allowed to view
video, adjust their password, and delete their own account. Common users are
not granted any additional authorities.
Note: The default user under factory settings is “admin.” The password is
111111. Both usernames and passwords are case sensitive.