User manual

After saving all parameters, click the [Exit] button, and the settings will take effect

immediately.

Now disconnect the network cable, and you can access the IP network camera via

Wi-Fi.

Note: It is recommended to use WPA or WPA2 Security on your network

Wi-Fi modes supported by the IP Camera:

802.11b/g protocol (small power Wi-Fi type)

802.11a/b/g/n protocol (large power Wi-Fi type)

·Listening Port (LPRT)

Figure 4-8 LPRT setting

[Web LPRT] The default port 80 is for accessing the camera through Internet

Explorer. If it is necessary to change the port number, the address used to

access the camera will use the following format: http://ip:port/. For example,

if the web port is changed to 81, you would type http://192.168.0.100:81 into

the IE address bar.