User manual

®
16
·Wi-Fi Settings
Figure 4-6 IPC WI-FI network setting
[Whether to use Wi-Fi] Select this checkbox to open the Wi-Fi network function of
IPC.
[Whether to use DHCP] If the router has DHCP enabled, select this, and the IP
camera will automatically obtain an IP address from the router.
[IP Address] Set wireless IP address of IP camera.
[Subnet mask] Default: 255.255.255.0 (It is recommended to not change
the Subnet mask.)
[Gateway] Set the gateway IP of IPC. For example, if the IP Camera accesses a
public network through the router, the gateway IP needs to be the same as the
router’s IP Address.
[MAC] The MAC address of the IP camera (It is recommended to not change the
MAC address.)