User manual

4.2.2 Network Parameters

·Wired Settings

Figure 4-5 wired network setting

[DHCP] If the router allows DHCP functionality, select DHCP to locate an un-

used IP Address on the router. After the camera is configured and is able to be

viewed online, it is recommended to keep DHCP disabled.

[IP Address] Set the wired cable IP address of IP camera device.

[Subnet mask] Default: 255.255.255.0 (It is recommended to not change

the Subnet mask.)

[Gateway] Set the gateway IP of IPC. For example, if the IP Camera accesses a

public network through the router, the gateway IP needs to be the same as the

router’s IP Address.

[MAC] The MAC address of the IP camera (It is recommended to not change the

MAC address.)

[DNS address] If the user has a DDNS account, the DNS address needs to be set

to the DNS address of the place to which the device is assigned to in the DNS

account.

After setting parameters, click the [Submit] button. The settings will take effect

immediately.