User manual

30
®
[
Motion Detection Setting
]
After enable motion detection switch, the setting interface will appear
grid line. User only needs to click the little cube on the image to set the motion detection area. Right
click the little cube to cancel related area detection.
[
Alarm Action Mode
]
Set linkage output format after triggered alarm. Sound alarm or sending email
can be selected. Sending email is sending motion detection alarm information via email to user.
[
Sensitivity
]
The sensitivity of motion detection includes four levels: high, little high, mid, and low.
[
Output Delay
]
Set delay time of alarm linkage, time range is limited between 0~30.
System Settings
Click on the
[
Congure
]
into the settings page, then click the
[
Local Settings
]
on the left.
[
Video Storage Path
]
Set local video, as the default installation directory: \Zmodo\Zviewer\
ZviewerVideo.
[
Screenshot Storage Path
]
Set capture image storage path. The default installation directory is
\Zmodo\ZViewer\ ZviewerImage.
[
HDD Full
]
Operate after the hard disk is full, can choose to
[
Overwrite
]
or
[
Stop Record
]
.
[
Video Storage Size
]
Default is 512M, minimum is 100M.
Uninstall Zviewer
Find unins000 at installation directory
Double click Uninstall ZViewer for Zviewer uninstall