User manual

23
®
[
DHCP
]
Start the DHCP function of the route, then IP camera will obtain address automatically
from the router.
[
IP Address
]
Set the IP address of IP camera device.
[
Subnet Mask
]
Default is 255.255.255.0 (Suggest user not to change this)
[
Gateway
]
Set gateway IP of IPC, for example if IPC access public network through router, the
gateway IP need to be set as the router IP which has accessed the public network.
[
DNS Address
]
if to use DDNS function, the DNS address need to be set as DNS address of the
place where the device is belonging to.
Wireless Lan Settings:
[
Whether to use WIFI
]
Select this to start the IPC wireless network function.
[
Whether to use DHCP
]
If the route enables DHCP function, select it and the IP camera will obtain
address automatically from router.
[
IP Address
]
Set wireless IP address of IP camera device.
[
Gateway
]
Set the IP address of the current wireless gateway (Route/AP), such as 192.168.1.1.
You can select a wireless network from the auto search list or manually add one.
[
Wireless Network
]
is SSID, is the login name of wireless network for authentication, it must be
consistent with the SSID of the wireless gateway (router/AP). (Such as: TP-LINK_4A2DDC).
[
Authentication Mode
]
can choose WEP, WPA, WPA2 three encryption methods, this setting must
be consistent with the security type of wireless gateway (router / AP).