User's Manual

Appendix B: iOS Setup
Figure 1 Figure 2
Figure 3 Figure 4
Device Management:
1. From the home screen (Fig1) press the
settings arrow in the bottom left and select
“Device Manage” (Fig2).
2. From the management screen (Fig3)
select the “+” icon in the upper right hand
corner to add a device.
3. From the Add Device page (Fig4) enter a
name for the DVR. Now enter the
corresponding IP address, Mobile port
number, case sensitive username and
password, and the number of channels
your DVR has. Current channel is 0.
4. Select save to save your device. (Note:
Grayed out values must have something
input before you will be able to save.
Connecting to a Device
1. From the home screen (Fig1) select 1 of the 4
windows so that an orange highlight is around
the perimeter of the box.
2. Press the settings arrow in the bottom left and
select Connect to Device (Fig2).
3. From this device list step 1 will bring you to
you may select your device from the list. After
selecting your device you may choose a
channel to play. This will play your camera in
the box previously selected in step 1.
4. Repeat steps 1 through 3 up to four times.
Each box may be connected to either the
same or separate devices from the list and be
controlled independently.
30