User's Manual

16-channel H.264 DVR User Manual
16
Name: Move the cursor to the input box of this option, and press Enter to enter the
“Input” screen of this option. Numerical, English and Chinese pinyin input methods
are supported.
Position: Move the cursor to this option, and press Enter to change over between
name positions; there are 5 setup options: top left, bottom left, top right, bottom right
and off.
Color: Move the cursor to Setup on the corresponding channel, and press Enter to
enter the “Color Setup” screen as shown below:
Press Enter or drag the cursor to adjust the picture color, including the four options of
chromaticity, brightness, contrast, and saturation. Press Enter to exit and save the
parameters.
Preview:
On: The picture of this channel can be seen in the “Video Preview “screen;
Off: The Video Preview screen of this channel has been blocked, but the recording
settings do not change.
Preview Time: On: The system date and time are displayed in the “Live Preview”
screen.
Record Time: On: A timestamp can be displayed in the playback of a record file.
Channel SEQ: Adjust the channel sequence times and split view options.
3.6.5 Video / Audio
Move the cursor to the VIDEO/AUDIO option, (The icon is surrounded by a yellow
frame to indicate selection.) and press Enter to enter the “Setup” screen of this option,
as shown below:
CAMERA SYSTEM: Left-click or press Enter to change over between PAL and NTSC.
(All Zmodo Cameras sold in the US are NTSC).
Volume setup: Move the cursor to Volume Setup, left-click or press Enter to enter
the Volume “Setup” screen, and press Left, Right or drag the cursor with the mouse
directly to adjust the volume.
Note: The system will restart when the VGA resolution or the camera
resolution is modified.