User's Manual

16-channel H.264 DVR User Manual
15
3.6.3 User Password
DEVICE ID: Enter digits to set a desired Device ID. This number will act the same as a
username.
PASSWORD: Press Enter to select ENABLE or DISABLE for the user password. If
this option is enabled, the user has to enter his/her password when logging in to gain
access to menu functions. If it is disabled, the main menu of the system can be logged
in directly.
USER PASSWORD: Set the User password. This password will only allow basic
functions and access to the DVR.
ADMIN PASSWORD: Set the Admin password. This password will allow access to all
functions of the DVR.
IMPORTANT: DO NOT SET BOTH PASSWORDS TO BE THE SAME.
Notes:
1. This unit has no initial password. When the user sets passwords, it is
recommended that the two passwords are set up at the same time. If any set
password is forgotten (or both are set to the same), please, contact Zmodo.
Zmodo will not reset a password without proof of ownership.
2. Only the locking, channel changeover, video search, log search, backup, PTZ
control, mute, manual recording, and stopping recording functions are available to
normal users.
3.6.4 Cameras
Move the cursor to the CAMERAS option (The icon is surrounded by a yellow frame to
indicate selections), and press Enter to enter the “Setup” screen of this option, as
shown below: