User's Manual

16-channel H.264 DVR User Manual
11
3.3 Video search
Enter the “Video Search” screen from SUB MENU →VIDEO SEARCH or MAIN
MENU→PLAYBACK as shown below: This unit supports 3 video search modes:
A. Time Based Playback
Time input: First, select the corresponding channel and then adjust the date
and time to be searched. Left-click or press Enter and the directional keys or enter
digits directly for year, month, date, hour, and minute, and then click Play to play back
the recording that covers this point in time. Up to four channels can play back
simultaneously.
B. Playback Based on Record Calendar
Mark the channel and enter the year, month, and date to be searched in the
DATE box and click SEARCH to load recorded videos in the calendar, as shown below:
Month: Displays recorded videos by month (Shown above as January). A green
block indicates normal recording, a red block indicates alarm recording, and the
background color indicates no recordings are on that day. Clicking or selecting a
day in the calendar will load that specific day’s recordings in the section below.
Date: Displays the recordings for a specified date (shown above as the 18
th
).
Color distinctions are the same as the month. Each hour is broken in to 2
segments and clicking one will take the user directly in to the playback for that time.
C. Playback Based on File list
Enter the year, month, and date to be searched in the DATE box, and click
SEARCH. Select the desired day of the MONTH bar and then FILE LIST and the
“File List” screen will pop up, as shown below:
Type: The user may narrow down the files shown by recording type (alarm,
timed, or all):