User's Manual

16-channel H.264 DVR User Manual
8
PTZ speed (fast or slow) can be controlled in this interface. Zoom, focus, and aperture
are also adjustable in this menu.
Cruise Setting:
1. Select the PTZ channel.
2. Set the pause time(s).
3. Adjust the arrow keys to the position which needs to be monitored.
4. Select SET POINT. Repeat steps 2–4 to set additional presets.
5. Select the APPLY button to save the settings.
6. Exit to live screen and select START CRUISE.
Notes:
1. To set up more points, repeat steps 2-5.
2. To view the current points already set position press JUMP.
3. To delete the point has been set, enter the point number and select CLEAR.
2.4.8 Mute
Turn on / off sound.
2.4.9 Manual Recording / Stop Recording
If timed recording is on (please see Chapter 3), and manual record is enabled
manual record will override any timed recording schedule. If “Record When powered
On Mode” is enabled, then this function is not available.
2.4.10 Zoom
In single-channel full-screen mode, this function can be done by dragging the
mouse to marquee area to enlarge