User guide

VIRTUAL H.264 4CH DVR USER GUIDE
22
5. Use the <LEFT> and <RIGHT> buttons to change the type of recording to ALL, MOTION, SENSOR,
MANUAL, or CONTINUOUS.
6.
Once you have selected the type of recording to search for, press <ENTER> to show a list that meet your
search criteria.
7. Use the <UP> and <DOWN> buttons to scroll through the on-screen listings.
8. Use the <LEFT> and <RIGHT> buttons to display a list of events that happened previously to or after the
current selection.
9. Once the desired event has been selected, press <ENTER> to start playing back the selected video.
10. Press the CAPTURE (BACKUP) button to launch the archiving function in playback mode.
Figure 4.2.2. Event search screen
4-2-2. TIME LINE SEARCH
The TIME-LINE search window is allowing user to find the stored video by using the time line bar.
1. Select the date of the video to begin searching by using the <LEFT>, <RIGHT>, <UP> and <DOWN>
buttons to navigate through the days.
2. Once you have selected the date, press the <ENTER> button to move to the time line search window.
3. Use directional buttons to select a time zone on the 24 hours time table.
4. Once you have selected the time zone, press the <ENTER> button to move to the 60 minutes time table.
7. Select All or a specific channel to search by using the <UP> and <DOWN> arrow buttons.
8. Once you select the channel, use the directional buttons to move the time line select bar (blue) to the point
TYPE:
A: All Event Recording
M: Motion Recording
S: Sensor Recording
R: Manual Recording
C: Continuous Recording