User guide

VIRTUAL H.264 4CH DVR USER GUIDE
18
3-6. Storage Mode
User can set recording mode or initiate format in the hard disk drive.
Item Description
OVERWRITE
Overwrite existing data when hard disk drive is full
FORMAT
Format hard disk drive
USB UPGRADE
The firmware of DVR can be upgraded through USB port via USB
memory stick.
Please follow the steps below for new firmware upgrade:
1. Create a new folder in USB memory stick. ( Note: The folder
name must be named “upgrade” )
2. Copy the new firmware bin file into that folder
3. Connect the USB memory stick to the front panel USB port.
4. Go to STORAGE Æ USB UPGRADE in the system menu
5. Select CONFIRM and the upgrading process will begin
automatically.
6. After the upgrade is completed, DVR will reboot automatically.
(Note : DO NOT TURN OFF DVR WHILE UPGRADING)
SAVE SETUP TO A
USB
User can save the current configuration of DVR to the USB memory
stick by simply insert the USB stick on the front panel and press
<ENTER> / <SEL> to start the saving process
LOAD SETUP FROM
A USB
User can upload the configuration of DVR to another DVR using the
USB Memory stick by simply insert the USB stick on the front panel and
press <ENTER> / <SEL> to start the loading process.
After upgrade is completed, DVR will reboot automatically and setup
value will be applied.
VIDEO DELETE
Enable/disable recording limit.
DELETE VIDEO
AFTER
Set the limit days for recording to the hard disk drive from 1 to 60 days.