User guide

VIRTUAL H.264 4CH DVR USER GUIDE
14
PASSWORD
ask you current password and new password. The DVR will guide you
through the entire process of setting up the user password. The password
numbers (1,2,3,4) can be input by using direction keys. or number keys.
The default password is 1111.
DATE FORMAT
Select the preferred date and time display.
SET DATE & TIME
Set the present date and time. If DLS function is ON, user can not enter into
this menu and change data and time.
PTZ CONTROL
Set the camera speed, number, type and ID
LANGUAGE
Select system language.
REMOTE
CONTROLLER ID
Select an ID of remote controller.(Default ID is 0)
1. Select ID from 0 to 9.
2. Press the same number as ID set in DVR on a remote controller
3. Then
icon will be displayed on Live screen of DVR that respond to
the remote controller.
DLS
User can set to ON or OFF for DLS(Daylight Saving) by using <LEFT> or
<RIGHT> button. After selecting ON, move the cursor to BEGIN
(MM/DD/HH) and press the SELECT button to set the start time of DLS. And
move to END (MM/DD/HH) to set the stop time of DLS by using <UP> or
<DOWN> button.
CAUTION:
-DLS can’t start from 23:00
-DLS can’t be applied, if the date of BEGIN and END is same.
System setup screen