User guide

VIRTUAL H.264 4CH DVR USER GUIDE

PRE RECORD

Enable/disable pre-event recording. Pre-event recording time is 3 sec

and only intra-frames are recorded for pre-event recording.

POST EVENT RECORD

Set post event recording time duration up to 30 seconds for the specifie

d channel.

ALARM

Enable/disable alarm generation for the specified channel.

ALARM DURATION

Set alarm time duration for the specified channel.

AUDIO

Enable/disable audio for the specified channel

SCHEDULE

Set recording schedule.

3-3-1. Motion Zones

By selecting Partial Zone in the Motion Zone menu, users can setup the motion sensing zones

in the screen below. Move around each rectangular zone using 4 direction key buttons

and press <Enter> button to include the rectangular region as part of the motion

sensing zone. The rectangular blocks included as part of the motion zone are indicated by changing the

color of the blocks.

Motion Zone selection screen

NOTE

1. In order to receive smooth video during playback, it is highly recommend to set the

frame rate of each channel for more than 3fps

2. Switch to full screen during playback while audio recoding is enabled.