User guide

VIRTUAL H.264 4CH DVR USER GUIDE

3-3. Setup – Recording Mode

Set the values for recording video. Navigate through menu items by pressing the <UP> or <DOWN> button. User

can change the value of the menu item by pressing the <LEFT> or <RIGHT> button.

Recording mode setup screen

Menu items in Recording mode setup

Menu item Description

RESOLUTION

Set resolution to either

704x480(NTSC)/704X576(PAL) or 352x240(NTSC)/352X288(PAL).

CHANNEL

Select the channel to apply the following settings.

FRAME RATE

Set the frame rate for the specified channel. The sum of the frame rate

from each channel cannot exceed maximum frame rates for a particul

ar recording resolution.

Maximum frame rates for NTSC video are 120/100fps for

352x240(NTSC)/ 352X288(PAL) and 30/25 fps for 704x480(NTSC)/

704X576(PAL)

QUALITY

Select the recording quality for the specified channel from NORMAL /

HIGH / SUPER.

RECORDING

Assign the recording mode for each channel.

Continuous / Motion / Sensor / Schedule / Disable.

MOTION ZONE

Select Full Zone or Partial Zone for motion sensing. If the Partial Zone is

selected, screen will be change to setup motion Zone

MOTION SENSITIVITY

Set the motion sensitivity for the specified channel.

Adjust the motion sensitivity from 1 to 9.

SENSOR TYPE

Set the type of sensor for the specified channel from none,

N/O (normal open), and N/C (normal closed).