User guide

VIRTUAL H.264 4CH DVR USER GUIDE

3-2. Setup – Live Mode

Set the values for live display. Navigate through the menu items by pressing <UP> or <DOWN> button. The value

of the menu item can be modified by pressing <LEFT> or <RIGHT> button.

Live mode setup screen

Menu items in LIVE mode setup

Item Description

OSD

Enable/disable on-screen display.

SEQUENCE

Enable/disable sequential display of video channels in full screen mode

SEQ-DWELL

TIME

Dwell time for each cannel display in sequential display mode

EVENT BEEP

Enable/disable internal beep alert sound.

OSD CONTRAST

Set the visibility level of the On Screen Display (OSD)

CHANNEL

Select the channel for applying the following settings.

DISPLAY

Enable/disable display of the video channel in live display mode

SEQ LIST

Enable/disable the specified channel to be included in sequential display

mode.

BRIGHTNESS

Change the brightness value for the specified channel

CONTRAST

Change the contrast value for the specified channel

HUE

Change the hue value for the specified channel

SATURATION

Change the saturation value for the specified channel

VGA SCREEN

MODE

Select VGA screen mode as either FULL or Normal.

NOTE: If the mode is changed, the system will reboot.

ERROR ALARM

Enable/Disable alarm for video loss or HDD fail.