Specifications

Using the NVR
4.17
b. Once changes have been made, always press [Save] before navigating
to another page or editing schedules for another day otherwise the
changes will lost.
3. Define how the system responds when an alarm is triggered. There are
three possible responses when an alarm is triggered. Choose an option by
selecting the box next to it. NOTE: The system will automatically record video
when an alarm is triggered.
a. "Buzzer" The NVR's built-in buzzer will sound.
b. "Alarm Output" The NVR will activate any external alarms that have
been connected to the back panel (see: 3.1 NVR Installation –
Connecting an External Alarm).
c. "Alarm Duration" will adjust how long both the buzzer and the alarm
output will sound after motion is detected.
d. "Send E-mail" The NVR will send an email notification. The NVR comes
with predefined server settings for common service providers, however
you may need to specify your own settings if your provider is not included.
Choose an email address using the specified service provider to send the
email and input the corresponding password to the existing email address.
Alarm Input Select the channel of the input alarm that you would like to edit.
Select "On" to enable this alarm.
Type Select the type of alarm that you are using. Please refer to your alarm's
manual if you are unsure of this.