Specifications

Using the NVR
4.15
b. Once changes have been made, always press [Save] before navigating
to another page or editing schedules for another day otherwise the
changes will lost.
3. Select the motion detection area. Using the motion detection grid, define a
motion detection area by left-clicking on a square. Click-and-drag to toggle
large areas. You may adjust the sensitivity of the motion detection with the
[Sensitivity] drop-down menu.
4. Define how the system responds when motion is detected. There are four
different responses that the system can take when motion is detected. NOTE:
The system will automatically record video when motion is detected.
a. "Alarm Sounding Buzzer" The NVR's built-in buzzer will sound.
b. "Alarm Output" The NVR will activate any external alarms that have
been connected to the back panel (see: 3.1 NVR Installation –
Connecting an External Alarm).
c. "Alarm Duration" will adjust how long both the buzzer and the alarm
output will sound after motion is detected. NOTE: The alarm will sound
continuously while motion is being detected.
d. "Snapshot" The NVR will take a snapshot and send it to your mobile
device and email address (when configured).
e. "Send E-mail" The NVR will send an email notification. The NVR comes
with predefined server settings for common service providers, however
you may need to specify your own settings if your provider is not included.
Choose an email address using the specified service provider to send the
email and input the corresponding password to the existing email address.
f. "Alarm Interval" This setting defines the interval between motion
detection notifications. For example, when set to 1 minute, the NVR will
send an email notification every minute when motion is detected.
5. Save and then select another channel to configure. If you do not save
prior to selecting another channel, all changes will be lost. You may also restore
setting defaults by pressing [Default].