Specifications

Using the NVR
4.10
Network Transmission Stream Changes the video streaming settings for
devices that are connected to the NVR remotely (devices that are connected
through 3G/4G or a different internet connection than the NVR).
Video Quality Change the overall quality of the video. Increasing the quality also
increases the bandwidth used.
Frame Rate (FPS) This changes the number of pictures (frames) per second that
make up the video stream. The higher this value, the smoother and better the
video quality is, however increasing this value also increases the bandwidth.
Resolution Change the resolution of the video stream. QVGA=320x240.
Streaming Bit Rate This is the type of bit rate that the NVR uses to view video
from the camera. VBR stands for the variable bit rate, and CBR stands for the
constant bit rate—CBR is higher quality than variable, however it uses more
bandwidth.
Video Mask
The NVR allows you to mask / hide certain areas of your camera feed from
recording and monitoring.
To create an area to mask you must first select the channel to edit and check
[Enable]. Select an area by clicking and dragging down and to the right with your
cursor. A gray box will appear. Remove the selected areas by right-clicking on
the box. After you are done, press [Save] and proceed to other channels or
return to the home-screen.