Specifications

Using the NVR
4.8
Device Management
Use the Device Management menu to manage the IP cameras connected to the
NVR.
Add Device
Search and Add All Devices Automatically Check this box to enable the
automatic search and add functions of the NVR. If there are empty channels, the
NVR will automatically search and add nearby cameras. Please wait 3-5 minutes
for this process to be completed.
Search for Devices Select to search for devices with the same protocol. A pull
up menu will appear for you to manually select the devices to add.
Auto Add Will prompt the system to automatically search for and add devices.
Add Device Manually Allows you to add a specific device by inputting the MAC
address and port information.
Refresh Refresh the page to update camera information.
Delete Device Select a channel and press [Delete Device] to remove the camera
assigned to the corresponding channel.