User's Manual

757880243 ZM-SHWZ01W 遥控器 快操 REV-A00
尺寸：55*75mm（成品尺寸）
材质:105g双铜+双面印刷4C +折页
Pivot
Quick Start Guide
Method 1: Configure using your smart hub device
settings.
Select the “Accessories” option.
Select the “Wireless Device and Smart
Kit” connection method, and choose the
“Accessories” option to connect your
Remote Control.
Like us on Facebook.com/Zmodo
Scan the QR-code!
Follow us on Twitter @Zmodo
Scan the QR-code!
正面
背面
Name your sensor and set a password
for it. Tap to proceed.
Note: The password provides an additional layer
of security for your devices. You will not need to
use this password when accessing your devices
from the Zmodo app. It is not required, but it is
highly recommended.
√
Name your remote control and set a
password for it. Tap to proceed.
Note: The password provides an additional
layer of security for your devices. You will not
need to use this password when accessing your
devices from the Zmodo app. It is not required,
but it is highly recommended.
Make sure that you have a Zmodo smart
hub configured to your account. Select
your smart hub device and access the
Device Settings tile.
1
1
Log in and select the Add Device
option in the upper right corner.
+
Getting to know your Remote Control
1
The Zmodo Remote is a smart accessory that allows
you to quickly control your Zmodo devices. When
connected to a Zmodo smart hub, the remote will
allow you to toggle notification modes with the press
of a button.
Note: The remote connects to a Zmodo smart hub,
and will only work when in range with your smart hub
This quick start guide will help you configure your remote
control for initial use. For detailed instructions and
troubleshooting, please visit:
Before you begin:
Make sure that you have a strong 915MHz connection at
the location of your sensor. Visit www.zmodo.com/support
You need to have a smart hub device already added to
your Zmodo account.
Make sure your smartphone is connected to the 915MHz
network that your Zmodo smart hub device is connected
Download and install the “Zmodo” app from Google
PlayTM or the App StoreTM. Launch the app and sign in
with your Zmodo account information. All devices will be
Zmodo
We are constantly working to improve our product and app. Please visit
www.zmodo.com/support for updated instructions, manuals, and more.
Tap the icon. Following the on-
screen instructions, press any button
on the main portion of your Remote
Control.
+
Following the on-screen instructions,
press any button on the main portion
of your remote control.
The app will generate a list of
Zmodo smart hub devices on your
account. Select the hub that you
would like to pair your remote
control to, and tap to proceed.
√
Mobile Setup
2
If your remote control stopped working:
You may need to change your remote control battery.
You can check your remote control battery level by
accessing your smart hub’s device settings and selecting
In order to work, your remote must be connected to
your Zmodo smart hub. Please make sure that you are
“Emergency" key
Battery compartment
"Home" key
“Away" key
“Sleep" key
①
②
③
④
1
Press this key when you are at home. You will not
receive alert and sound notifications on your
Press this key when you leave home. All alert and
sound notifications will be enabled for your phone.
Press this key when you are ready for bed. Only
sound notifications will be activated, alerting you if
Pressing the emergency button will enable / disable
2
2
3
3
4
4
Method 2: Configure using the Add Device menu.
1
1
2
5
+
1
3
4
6
√
1
5
7 8
If you cannot connect your remote control:
Having difficulty?
Make sure that your smart hub devices are updated.
Access your Device Settings, and press the “General”
option to check your firmware.
Try connecting your remote control in a location closer
to your smart hub devices.
Support
3
For more instructions, troubleshooting, support, and
other resources, please visit:
Remote Control Key Accessory
Quick Start Guide
Note: All modes are set to default settings but can be customized
in the app.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
9