User's Manual

This method is not used as often, but when you process machine be sure to write
parameter or program shift. We recommend you adopt the LAN connection to
process the modification of machine parameter.
2.2.3. IP Camera & PC connection
Under this connection, users must set PPPoE dialing parameters on the IP
camera itself. Input the username and password of ISP supplier and offer permit
IP camera dialing to connect to internet. To set the PPPoE dialing parameter
connect the device to network through the first way, then write parameter to the
device. Another option is to follow the third way to direct process parameter and
write to device. For detailed steps please refer to 3.4.5.
2.2.2. PPPoE Installation
Connect to IP camera (note: don't apply wrong power). After one minute
modification, video should be connected by internet cable directly to the camera.
When yellow light is on and green light is blinking, you will know that the physical
6
IP Camera