User's Manual

For example: If the is on , the device is the first to monitor the status.
When you log on the operator interface, you can perform PTZ and video
parameters.
If you want to see 4-way, or 9-way-- you can click the icon or
Direction control: Click the arrows in different directions to rotate the lend in the
appropriate direction.
Vertical cruise Level cruise
1. Image mirror indicates a reverse image.
2. Resolution, mode, brightness, contrast default setting are: 320*240、50HZ、6
、4、Mode is mainly for the adjustment of light strength, please adjust to 60HZ
when lighting is poor/dark.
3. There are 3 browse modes in Internet Explorer mode: visitor, operator and
administrator which has authority.
Logging into different modes will cause the operation to differ. Regarding the user
authorities, please refer to 3.4.4. Equipment User Administration.
OSD: In the video display date and time. You can disable the OSD function or
choose the color of OSD.
Snapshot Photo: Click the icon to take a photo.
Video: Click icon to enter the recording mode, the icon becomes . Click
again to end recording.
When you are logged on as Administrator, click on “Administrator action” to enter
setting interface. Device Information: You can see the device serial number,
equipment systems and device firmware version of the application.
Alias setting : You can set your favorite device aliases.
Date&Time set : Set the date and time.
User settings : Can be set up to 8 users. On this page you can set up accounts
with user name and password as well as in their packet (administrator, operator,
visitor).
Visitor: In this mode, you can only visit.
Operator: You can set the direction of the lens device, set the video screen’s
brightness, contrast and other parameters.
Administrator: You can set the device advanced configuration.
3.4. Manager Operation
13