User's Manual

Zmodo IP Camera
20 | Page
Technical Support
[e-mail]
1-217-903-5674
9 – BACKEND MENU INTERFACE OPERATION
* The Backend Menu may only be accessed by the Administrator Group Login Profile.
9.1.1 – DEVICE INFO
The device info screen displays the primary statuses; no
settings may be changed or altered from this screen. The
following statuses are displayed:
 Device ID
 Device Firmware Version
 Device Embedded Web UI Version
 Alias
 Alarm Status
 DDNS Status
 UPNP Status
 P2P Status
9.1.2 – ALIAS SETTINGS
From the Alias Settings menu, the user may change the
IP Camera’s alias.
9.1.3 – DATE AND TIME SETTINGS
From the Time and Date menu, you may adjust the time
zone settings.
The Device Clock Time will display the time setting that
the camera is currently synced to.
In the Device Clock Timezone section, you may choose
which time zone you prefer the IP camera to display.
Clicking the “Sync with NTP Server” will enable the
camera to sync with the selected NIST Internet Time
Service (NTP Server).
Clicking the “Sync with PC Time” will enable the
camera to display the exact same time as your PC.