User's Manual

Table Of Contents

IPCAM User Manual

In the multi-device configuration page, you can see all the equipment inside

the LAN. The first device is the default device. You can add more devices listed

in the list of equipment. Embedded applications, up to 4 devices at the same

time-line. Click the “second road equipment” and double-click “Current list of

devices in the LAN” in the device entry name, host address, Http port will

automatically be filled, require the user to fill in the correct account name and

password, click “Add.” Repeat this process you can continue to add devices.

Finally do not forget to click on the “Settings” button.

Figure3.10

�

� Add

Add

Add a

a device

device

device on

on the

the

the internet

internet

First, make sure you want to add devices to access via IP address or domain

name. For example:http://202.96.133.134: 9008 or

http://IPcam.dyndns.org:9008.

And then fill in host address: 202.96.133.134 HttpPort

HttpPort

HttpPort: 9008 or host address:

IPcam.dyndns.org Http

Http

Http port

port

port: 9008. and fill in the correct account name and

password to the last click on “Add.” Repeat the above steps can add other

devices