IP Camera User Manual For further help, please visit www.zmodo.
Preface: Dear customer, thank you for choosing to purchase and use our IP camera products. This series of IP monitoring product is the integrated IP network camera which is researched for network video surveillance monitoring. The series includes network bullet camera, network IR bullet camera, and network dome camera, etc. High performance, monolithic SOC chip is utilized as media processor which integrates video capture, compress and transmission. Standard H.
® Contents 1 Product Introduction........................................................................................2 1.1 BRIEF INTRODUCTION..............................................................................2 1.2 MAIN FEATURES........................................................................................2 1.3 INSTALLATION STATEMENT......................................................................2 1.4 NETWORK IP CAMERA CONNECTION.................................................
® 1 Product Introduction 1.1Brief Introduction This product is digitally monitored with a traditional analog camera and web video service. Efficient Linux system, code in flash and small size that’s reliable and steady. Power Network Reset Figure 1-1 Network IP Camera Figure 1-2 Camera Cable Ports 1.
® 2.Before installation please carefully read this user manual. 3.When you install the IP camera, please close the power source of all the related devices. 4.Check the voltage of the power source, to prevent device damage by mismatching of voltage. Installation environment: please do not use equipment under high humidity or temperature. Make sure there is good ventilation and no blocking of air-vent. Place it on a flat floor. Do not install it under violent vibration. 1.
® Figure 2-1 Security Level Setting Install ActiveX and plugins: Type the network camera IP address in the IE browser address bar, and press [Enter] to pop out dialog box of install ActiveX. Click [OK] to install. Log in and Preview: In Login screen, type in network camera username, password, choosing language and click [OK] to enter the video preview interface. Default: IP Address: 192.168.0.
® 3 Preview Figure 3-1 Real-time Preview Interface In the real-time preview interface, the user can control the video channel switch, record, snapshot, full screen preview, image process, image color, direction configuration, and PTZ control. [Video Channel] Double Click the channel number to open the video channel to view image, right click and choose “Close” to close the video channel.
® Figure 3-2 I mage parameter adjustment Figure 3-3 Color and direction control Figure3-4 PTZ control [System parameter setting] Click this button to enter into system parameter setting interface. [Reboot device] Click this button to reboot the device. 4 System Setting 4.
® [Video files Packing time] Set the file size record time. [Video/Captured file Storage path] Set file path for local recording and capture. After configuration is finished, click [Submit] button, the configuration will take effect immediately. 4.2 Remote configuration 4.2.1 Video Setting ·On Screen Display (OSD) control Figure 4-2 OSD control setting [Title] Name of video channel will be shown on the up left of the image, maximum 16 characters. Click the check box and it will display OSD.
® ·Video n g C o d i Figure 4-3 Video coding setting [Video Quality] The user can choose the appropriate desired image quality: Best, Very Good, Good, Common, Not Good. [Stream Type] Two types: CBR(Constant bit rate)and VBR(Variable bit rate) to choose, CBR enables constant bit rate coding, VBR enables variable bit rate coding. [Resolution] Sets the image resolution: main stream VGA(640×480=307200 pixel), sub stream QVGA(320×240=76800 pixels). [Frame rate] set coding frame rate per second.
® ·Video shield Figure 4-4 Video shield setting [Video shield switch] Enable or disable the video shield functionality [Shield area setting] User can set shield area by dragging mouse with left key pressed, and cancel the shield box on the shield area by right clicking the mouse. You can choose to shield the whole image, or only shield the part of the image. It can mask up to four areas. After setting parameters, click the [Submit] button, the setting will take effect immediately.
® 4.2.2 Network Parameter ·Wired Setting Figure 4-5 wired network setting [DHCP] If the router allows DHCP functionality, select DHCP. The IP Camera will obtain IP address automatically from the router. If the router does not allow for DHCP functionality, then the IP address must be obtained manually. [IP Address] Set wired cable IP address of IP camera device. [Subnet mask] Default: 255.255.255.
® ·WIFI setting Figure 4-6 IPC WIFI network setting [Whether to use WIFI] Select this check to open the wifi network function of IPC. [Whether to use DHCP] If the router allows DHCP function, select this type, IP camera will obtain IP address automatically from router. [IP address] Set wireless IP address of IP camera. [subnet mask] Set IP address of the current wireless gateway( router/AP), such as 192.168.0.1 [Hotspot adding] After switch to Wifi setting, it will automatically search the hotspot.
® Figure 4-7 Wifi Hotspot setting If entered this screen by double clicking, hotspot will be assigned automatically; if entered this screen by clicking “Add hotspot”, user has to type in hotspot, corresponding encryption mode and password. Click [Connect], close the dialog box, and connected or not will be list on the search results list. If connected, “Connected” will appear after hotspot name; if not, please click “Refresh” to refresh connection status or click this button to search device again.
® ·Listener port (LPRT) Figure 4-8 LPRT setting [Web LPRT] The default port 80(port 80 is recommended), port for download active X, if necessary to change, it should add port number behind IP address during web visit http://ip:port/, such as http://192.168.0.100:/81 . [Video LPRT] default 8000 (8000 is recommended). [Mobile phone LPRT] default 9000 (9000 is recommended). After setting all parameters, click the [submit] button, the setting will take effect immediately.
® ·PPP0E Figure 4-9 PPPOE parameters setting [Switch] Set to open or close PPPOE dial-up function [User name] The ADSL dial-up account, obtain from internet service provider [Password] Password of ADSL dial-up account, obtain from internet service provider After setting all parameters, click the [submit] button, the setting will take effect immediately.
® ·UNPN (Auto port mapping) Figure 4-10 UNPN port mapping setting [Switch] If in LAN it has server with UPNP functionality, enable this function, the server will automatically forward the set port to public network. [web mapping port] Set the web port which will be mapping to the server. [digital mapping port] Set the digital port which will be mapping to the server. [Mobile phone mapping port] Set the mobile phone port which will be mapping to the server.
® ·Email Figure 4-11 Email parameters setting It is used to set Email address and related parameter of alarm email. [SMTP Server] send email server address, different email service provider provides different email server address, such as SMTP server of Google email box: smtp.gmail.com [Email receiving address] Email address to receive the email. [Email sending address] Email address to send email. [SMTP password] Log in password for the email box. [Email title] The title of sending email.
® ·FTP Figure 4-12 FTP parameters setting FTP services will send the alarm triggered recording file or captured photo via FTP to certain FTP server. [FTP server] IP address or HTTP network address of FTP server. [FTP port] Port of FTP server, default port is 21. [User] User name of the FTP Server. [Password] Password of the FTP Server. After setting all parameters, click the [Submit] button, the setting will take effect immediately.
® ·DDNS Figure 4-13 DDNS parameter setting Dynamic DNS setting, through this setting it can bond device with a fixed domain, no matter how public network IP varies, it can visit the device via this domain. User can register a DDNS account on website of 3322.org. [Switch] Setting open or close DDNS function. [Server] 3322.org or dynDDNS.org selectable. [DNS] The device domain which is set by user, such as zmodo.3322.org. [User] The user name which you registered on DDNS server.
® 4.2.3 Alarm setting Figure 4-14 Motion detection setting [Protection time setting] Set the protection time of motion detection. It can set detail time period of everyday, up to four time periods. Select the time and click the [Save] button, then the time period selection will take into force. [Motion detection switch] Set open or close of motion detection,enable this switch to edit the motion detection area.
® 4.2.
® [Version] Display device name, system version, video/audio channel number, sensor/alarm input/output, local storage. [Time Setting Switch] Enable this switch to manually set the system date and time; disable this switch then the system date and time will be synchronized with local PC only to check the status and can't be configured to disable this switch. After setting all parameters, click the [Sync time] button, the setting will take effect immediately. 4.2.
® ·Periodic maintenance Figure 4-18 Periodic maintenance setting [Periodic Maintaining] Choose to open periodic maintenance and set maintenance time, detailed maintenance time on everyday can be configured. After setting all parameters, click the [submit] [Restore factory setting] Click this button to recover all the setting of the device back to factory setting. [Reboot Device] Click this button to reboot the device.
® ·Software update Figure 4-19 Software Update [Update File] Click “.” to browse for the correct update file (application file: RELAPP, Please not change the file name), click “Update”. During the update, it will display update information. After update finished, IP Camera will reboot automatically. Log into the device once again and enter the software update interface to check whether the system version has been updated.
® 4.2.6 Serial port set up Figure 4-20 Serial port setting When IP camera has external RS485 communication or control device (such as a PTZ controller) the user needs to set the RS 485 parameter according to the setting of these external devices. The channel, address, speed, protocol, and bit rate need to be set accordingly. Only all these are set correctly, the external communication device can be used to control the camera. [Channel] Select the channel of device.
® 5 Appendix Appendix 1 Specification VGA Network Camera Camera Sensor 1/4’’CMOS sensor Pixel Picture procession Power Network interface Indicator light Antenna Temperature Humidity Video compression Video code Sub video code 640(H)× 480(V) Brightness, contrast, saturation, hue 12 V DC @ 300 mA RJ45 10/100M Power indicator light /Status Indicator light Wifi antenna seat Hold pressing the RESET button 5 seconds, the system will clear user’s data automatically and restore factory setting -10- 50°C 20%-80
® IP Camera DDNS Analysis process If you would like to assign a DDNS service to your IP Camera, please contact product support for a recommended current DDNS service. Recommended DDNS services will periodically change as a result of support developments or cost changes. Product support will be happy to recommend a current DDNS service. Log in client-side software → Remote configuration → Network parameter → DDNS setting Apply for No-IP Domain The website address of No-IP is: http://www.No-IP.
® If you have registered in this website, directly input user name and password, click login enter the website.
® After enter your own space, you need to apply for your own free domain, now click the button Hosts/Redirects, enter into host management. Choose Add a Host Enter the interface of host application: Hostname: the domain name you are applying Host Type: please choose DNS Host IP Address: you’re outer net IP Assign to Group: Group distribution (you can choose default value) Enable Wildcard: you can choose default value Other parameters choose default value Application finished.
® For example, this is the free domain which is just applied successfully: jerry123. zapto.org. Step Three: DDNS setting No-IP.com jerry123.zapto.org jerry123 Adjust the IP address of device, the IP address needs to be LAN IP of the router which means the network segment when you enter into the internet in ordinary time.
® Port mapping setting of D-Link router Type in the IP address of router in browser, to log in the main interface of router management.
® To reach port forwarding on a D-Link router, first navigate to the advanced tab. Then, on the left hand side, select virtual server. Under name, you can just put down DVR The private IP is the IP address of the DVR The private and public ports should be set to the same value, which is the port you’re trying to forward. Be sure to choose always, and hit apply. Repeat as necessary until all ports are forwarded.
Your Security · Our Priority
