Owners Guide

19
OPERATION
Cooktop Cooking
SURFACE BURNER OPERATION  ELECTRIC IGNITION
To activate the electric ignition, simply push the knob in to activate the spark. While
still pushing the knob in, turn the control knob counter-clockwise to release the gas.
The spark will be released at the metal tip of the white ceramic pin located on the side
of the burner. Once the flame is on, release the control knob gently. If the flame turns
off, simply repeat the above procedure.
DO NOT ignite the burners if the black burner cap is not installed or not
centered, the flame will be irregular.
MANUAL IGNITION
Manual ignition is always possible even when the power is cut off or in the event of
a power failure. Turn the control knob counter-clockwise to the MAXIMUM position;
light the flame with a kitchen lighter or with a match.
USING THE BURNERS CORRECTLY
Keep children at a safe distance from the appliance during operation. DO
NOT allow children to operate the appliance!
1. Always check that the burner
caps are properly installed before
operation:
2. Verify that the flame of the worktop
burners is completely blue and with
a regular aspect as shown below:
3. Never let flames wrap around
cookware.
WARNING
WARNING
A
B
A
B
Correct
Incorrect
Correct Incorrect
A
B
A
B
A
B
Correct
Incorrect
Correct Incorrect
A
B
A
B
A
B
Correct
Incorrect
Correct Incorrect
A
B