Owners Manual

76
Installation Requirements
Installation Requirements
INSTALLATION ADJACENT TO KITCHEN CABINETS
For the best look, the worktop should be level with the cabinet countertop.
Product size A B C D H1 H2
30” 30” 21 ” 28 3/8” 18 7/8” 2 13/16” 5/8”
36” 36” 21 ” 34 3/8” 18 7/8” 2 13/16” 5/8”
Clearances A B D E F
30” 6” min 6” min 3 1/2” min 30” 3 1/2” min
36” 6 min” 6” min 3 1/2” min 36” 3 1/2” min
L1 L2 L3
Cut out size Suggestion Min Max Suggestion Min Max Min
30” 29” 28 9/16” 29 3/8” 19 1/2” 19 1/8” 20 3/8” 2 1/2”
36” 35” 34 9/16” 35 3/8” 19 1/2” 19 1/8” 20 3/8” 2 1/2”
INSTALLATION INSTALLATION
ATTACHING THE DROPIN
To prevent liquids from accidentally leaking into the underlying storage space, the
appliance is equipped with a special gasket. To apply this gasket, carefully follow the
instructions in Fig. 1.
1. Lay out the protective sealing strips along the edges of the opening in the bench
top and carefully overlap the strip end. (See Fig. 1).
2. Insert the dropin into the bench top opening. With a screwdriver assemble the
brackets (A) to the hotplate bottom by means of the screws (B)(See Fig. 2).
3. Slide the hooks into position and secure them with the screws.
4. Trim the part of the sealing strips that extend beyond the dropin base.