User Manual

The manufacturer will not be responsible for any damage to property or to persons

caused by incorrect installation, improper use of the appliance, or failure to heed the

warnings listed.

The manufacturer reserves the right to make changes to its products when considered

necessary and useful, without affecting the essential safety and operating

characteristics.

This appliance has been designed for non-professional, domestic use only. Do not

place any pot or pan on the open oven door. The door is made of glass and can

break under the weight.

Before beginning installation, please read these instructions completely and carefully.

Do not remove permanently afﬁxed labels, warnings, or plates from the product.

This will void the warranty. Please observe all local, state and national codes and

ordinances. Please ensure the range is properly grounded. The installer should leave

these instructions with the consumer who should retain for local inspectors use and

for future reference. The plug should always be accessible. Installation must conform

with local codes or in the absence of codes, the National Fuel Gas Code NSIZ223.

1/NFPA54. Electrical installation must be in accordance with the National electrical

code ANSI/NPA70-latest edition and/or local codes. In Canada: Installation must

be in accordance with the current CAN/CGA-fe 149.1 National gas installation

code or CAN/CGA-B 149.2, Propane installation code and/or local codes.

Electrical installation must be in accordance with the current CSA C22.1 Canadian

electrical codes Part 1 and/or local codes.

Installation of any gas-ﬁred equipment should be made by a licensed plumber. A

manual gas shut-off valve must be installed in the gas supply line ahead of the oven

in the gas ﬂow for safety and ease of service.

An air curtain or other overhead range/cooktop hood which

operates by blowing downward airﬂow onto the range, shall not be

used/installed in conjunction with this gas range.

WARNING

Important Safety Instructions