Installation Sheet

54
Wall Hood Installation
WALL HOOD INSTALLATION
Installation Tutorial Video
WALL HOOD INSTALLATION
A
B
C
D
6
E
F
A B C
D
E F
1. Main Hood with All Lights and
Button Banks Pre-Installed
2. Adjustable Stainless Steel
Chimney Cover
3. Transition Piece (for 6” or 8”)
4. Baffle Filters
5. Flexible Duct (for 6” or 8”)
6. Packet of Screws and Anchors
7. Top Mounting Bracket
8. Grease Cup
Please unpack your range hood when it is delivered and inspect to ensure all parts
are included.
NOTE: Wall range hoods with single motors will come with a square to 6˝ round
transition piece and will include a back draft damper. The ducting with these range
hoods is 6˝. Dual motor wall hoods will come with a square to 8˝ round transition
piece without a back draft damper. The ducting with these range hoods is 8˝ in
diameter.
Use rigid ducting wherever possible. Try and minimize the use of elbows. It is
recommended to establish 15-20” of vertical airflow from the top of the hood
before executing a 90° turn or elbow. More elbows and longer runs create higher
static pressure. No more than two to three elbows are recommended. Use 40 feet
of ductwork max. The hood comes with a grounded three prong plug that can be
plugged into a 15 amp circuit.
Wall Hood Installation
30”-36”36” Height 16”-max 31½”