Installation Sheet

4544

Single Motor Electrical Diagram

Changing the Transformer

REPLACE OR CHANGE TRANSFORMER:

1. Remove the screws from the transformer.

2. Remove the two connections to the lights.

3. Remove the two wired connections from the circuit board (you must remove the

circuit board cover).

4. Install the new connections from your new transformer (be certain the correct

wires are connected).

5. Reinstall the cover for the circuit board with screws.

6. Replace all screws in the transformer.

7. Reconnect the lights to the transformer.

NOTE: On units made before 2017 with three or more lights, there will be dual

transformers.

NOTE: Never work on or clean the range hood while power is ON. Always unplug

the unit or switch the electrical breaker to the off position.

CHANGING PARTS

Installation Tutorial Video

Scan Me

ground

SINGLE MOTOR ELECTRICAL DIAGRAM

CHANGING PARTS

ground