Installation Sheet

4342
Replacing Charcoal Filters
Changing the Grease Cup
CHANGING PARTS
Filter Support Screws
REPLACE OR CHANGE CHARCOAL FILTERS:
It is recommended to direct vent the hood whenever possible.
If your situation does not allow for a direct vent install, carbon filters are available to
recirculate the air through your hood.
1. Remove the stainless steel or aluminum filters from the bottom of the hood.
2. Locate the existing raised support screws on each side of the internal motor(s).
3. For each motor side, position the filter over its support screw and rotate to lock
into place.
NOTE: Replacement is recommended after 130 hours of cooking or 6 months of
operation. Replace more often if your cooking habits generate more grease.
NOTE: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
Installation Tutorial Video
HOW TO CLEAN, INSTALL, OR REPLACE THE GREASE CUP:
A removable grease cup is provided to catch any excess grease at the bottom of the
motor. Remove it every 2 to 3 months, wash it, then re-install it.
NOTE: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
CHANGING PARTS
Installation Tutorial Video
Scan Me
Scan Me
Slide into place