Installation Guide
Table Of Contents
16
INSTALLATION
REMOVING THE SHELVES
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Pull the shelf toward yourself until it is fully extended outward.
4. The shelf has plastic tabs on both sides indicated in the diagram below. While facing
the unit, press the plastic tab on the right side down while pulling up on the left tab.
5. Evenly pull out the shelf from the track until it is completely removed from the inner
compartment.
• To prevent damaging the door or door gasket, make sure the door is open at least
90° when pulling shelves out of the rail compartment.
Note: These installation instructions are for wooden shelves that come with the dual
zone wine cooler. ZLINE beverage coolers are equipped with glass shelves. To adjust or
remove, open the door completely and simply slide the shelves in and out of the pre-
installed metal brackets on the beverage cooler.
Removing the Shelves