Manualshelf

Installation Guide

ManualsBrandsZLINE Kitchen and Bath ManualsAppliancesMonument Autograph Edition 24 in. Dual Zone 44-Bottle Wine Cooler with Champagne Bronze Handle in Stainless Steel
11121314151617181920
Table Of Contents
13
INSTALLATION
INSTALLATION CLEARANCE REQUIREMENTS
When installing the beverage cooler or wine cooler under a counter, follow the
recommended spacing dimensions:
• For proper clearance of the electrical plug, allow at least 1” of clearance behind the
appliance.
• Installation next to a wall will require a minimum 2-1/4” door clearance to
accommodate the handle.
• The cabinet should allow at least 24” for width and 34-1/4” for height to
accommodate the or beverage cooler or wine cooler.
• The power cable is located on the bottom back right (left when facing the unit) and is
72” to accommodate multiple outlet locations.
• Once ready to install, adjust the back two feet to the desired height. Slide into place
and adjust the front two feet to ensure the unit is level.
• Installation should allow the unit to be pulled forward for servicing.
Clearance Requirements