Installation Manual MONUMENT WINE & BEVERAGE COOLERS www.zlinekitchen.
ZLINE Kitchen and Bath provides Attainable Luxury, where the kitchen and bath of your dreams is never out of reach. Through our unique designs and unparalleled quality, we’re dedicated to providing you an elevated experience in the heart of your home. With an endless selection of features and finishes, our inspiration is your reality.
ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing the highest end luxury designs and professional features into everyone’s homes. Because we continually strive to improve our products, we may change specifications and designs without prior notice. WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS 1 BEFORE INSTALLATION 8 WARRANTY 17
IMPORTANT SAFETY INSTRUCTIONS If the information in this manual is not followed exactly, a fire or explosion WARNING may result causing property damage, personal injury, or death. • Before beginning installation, please read and follow these important instructions for the safety of your home and the people living in it. Always read and obey all safety measures. • It is recommended that installation and service be performed by a qualified installer.
IMPORTANT SAFETY INSTRUCTIONS • To disconnect the appliance from power, grip the plug and pull it from the electrical outlet. Never pull by the cord. • Never operate the unit in the presence of explosive and/or flammable liquids or fumes; doing so may create a fire hazard or explosion. • Never install the unit or any of its parts near an open-flame, cooking, microwave, or any other heating appliance.
IMPORTANT SAFETY INSTRUCTIONS WARNING Never operate any other electrical appliance inside this unit. • Never attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified electrician, technician, or service provider. • Ensure all access panels are appropriately installed before operating. • It’s recommended to use two or more people to move and install the unit due to its weight.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important information regarding the proper installation, use, and maintenance of your beverage cooler and wine cooler. Following this manual will ensure that your product will work at its peak performance and efficiency. If you are experiencing problems, check the Troubleshooting Guide in the user manual. DISPOSAL OF REFRIGERATION APPLIANCES Dispose of your appliance packaging properly.
IMPORTANT SAFETY INSTRUCTIONS • Prior to use, clean the interior surface with warm water using a soft cloth. • The door on this appliance is designed so it may be opened from either the left or the right side. The unit is delivered with the door opening on the left side and swinging out to the right. Should you wish to open the door from the right, see installation instructions on page 15. INSTALLATION OF YOUR APPLIANCE Do not store or install the appliance outdoors.
IMPORTANT SAFETY INSTRUCTIONS ATTENTION • Never overload the unit’s cabinet. • Do not open the door unless necessary. • Never cover shelves with aluminum foil or any other material that may prevent air circulation. • It’s recommended to unplug the appliance if it sits empty for long periods. After cleaning, leave the door ajar to allow air to circulate to avoid condensation, mold, General Safety or odors from forming.
IMPORTANT SAFETY INSTRUCTIONS ELECTRICAL CONNECTION Improper use of the grounded plug can increase the risk of electrical shock. If the power cord is damaged, have it replaced by a qualified WARNING electrician or authorized service provider. • This appliance must be properly grounded for your safety. The power cord provided with this unit is equipped with a NEMA 5-15 plug that mates with standard NEMA 5-15 wall outlets to minimize the possibility of electrical shock.
BEFORE INSTALLATION PROVIDED MATERIALS IMAGE DESCRIPTION Reversible door upper hinge bracket (1) Reversible door lower hinge bracket (1) Door handle (1) Handle hardware kit (1) - refer to page 14 Allen/hex key Parts MATERIALS NEEDED IMAGE 8 DESCRIPTION Phillips-head screwdriver
BEFORE INSTALLATION PRODUCT SUMMARY This appliance requires a standard 120VAC/60HZ electrical ground outlet. SPECIFICATION MODEL MONUMENT BEVERAGE COOLER RBV-US-24 VOLTAGE/FREQUENCY 120VAC/60HZ AMPERAGE 1.
BEFORE INSTALLATION PRODUCT SUMMARY This appliance requires a standard 120VAC/60HZ electrical ground outlet. SPECIFICATION MONUMENT WINE COOLER MODEL RWV-UD-24 VOLTAGE/FREQUENCY 120VAC/60HZ AMPERAGE 2.
BEFORE INSTALLATION PARTS IDENTIFICATION Monument Beverage Cooler (RBV-US-24) Monument Wine Cooler (RWV-UD-24) Product Specifications 11
INSTALLATION DIMENSIONS Monument Wine & Beverage Coolers (RWV-UD-24 & RBV-US-24) Clearance Requirements *Unit height varies depending on adjustable legs.
INSTALLATION INSTALLATION CLEARANCE REQUIREMENTS When installing the beverage cooler or wine cooler under a counter, follow the recommended spacing dimensions: • For proper clearance of the electrical plug, allow at least 1” of clearance behind the appliance. • Installation next to a wall will require a minimum 2-1/4” door clearance to accommodate the handle. • The cabinet should allow at least 24” for width and 34-1/4” for height to accommodate the or beverage cooler or wine cooler.
INSTALLATION CARBON FILTER A built-in carbon filter protects your beverages by acting as a natural barrier against harmful odors. The filter should be replaced every 3-6 months. To replace the filter, search for BWC-003 on www.zlineparts.com, ZLINE’s official parts distribution partner. To replace the filter, first remove racks/shelves from the top of the unit to access the filter.
INSTALLATION REVERSING THE DOOR SWING OF YOUR APPLIANCE If you want to reverse the opening direction of the door, follow the instructions below as if the door handle is on the left side of the unit and the door swings out toward you to the right. A second person is recommended to tilt the cooler roughly 30° to help with this task. NOTE: Do not tilt the cooler more than 45° or lay it on its back, as that may damage the sealed cooling system.
INSTALLATION REMOVING THE SHELVES 1. Open the door completely. 2. Remove all of the contents loaded on the shelf, if applicable. 3. Pull the shelf toward yourself until it is fully extended outward. 4. The shelf has plastic tabs on both sides indicated in the diagram below. While facing the unit, press the plastic tab on the right side down while pulling up on the left tab. 5. Evenly pull out the shelf from the track until it is completely removed from the inner compartment.
WARRANTY COVERAGE ZLINE Kitchen and Bath Monument Wine & Beverage Coolers have a two year parts and service warranty and a five year parts warranty for a sealed cooling system. This is from the original purchase date for the original purchaser of the product. TERMS This warranty applies only to the original purchaser of the product installed for normal residential use. This is defined as a single-family, residential dwelling in a non-commercial setting.
WARRANTY NOTE: Please write down the model number and serial number of your appliance. The model number is located on the rating label on the back of your unit. The serial number is located on the top center of the interior on your appliance. Both are needed to obtain warranty service. Do not remove permanently affixed labels, warnings, or plates from the product. This will void the warranty. You may also consider attaching your receipt or proof of purchase to this manual.
1.3.2 www.zlinekitchen.com 1-614-777-5004 contact@zlinekitchen.
