FAQ

4
SAVE THESE INSTRUCTIONS
This manual contains important information regarding the proper installation, use, and
maintenance of your beverage cooler and wine cooler. Following this manual will
ensure that your product will work at its peak performance and efficiency.
If you are experiencing problems, check the Troubleshooting Guide at the back of this
manual (pages 12-13). It lists causes of minor operating problems that you may solve
yourself.
DISPOSAL OF REFRIGERATION APPLIANCES
Dispose of your appliance packaging properly. Refrigeration equipment must be
properly disposed of in an environmentally-friendly manner. This applies to any old
appliances and to your new unit once it reaches the end of its service life.
Please ensure that old or worn appliances are rendered unusable before
disposal by removing the plug, cutting the power cable, and removing
or destroying any snap fastenings or bolts. This will prevent children from
locking themselves in the appliance (risk of suffocation) and endangering
their lives in any other way.
WARNING
• The cooling system, particularly the heat exchange located at the back/bottom of
the unit, must not be damaged during installation or when using the appliance.
• This product is not to be handled as normal household waste — it should be taken to
a recycling collection point for electrical and electronic goods.
• By correctly disposing of this product you are contributing to the protection of the
environment. Improper disposal endangers health and the environment.
• Further information about the proper recycling of the product may be obtained from
your local government agency or waste collection department.
BEFORE USING YOUR APPLIANCE
• Remove all exterior and interior packing materials.
• Before connecting the appliance to the electrical source, let it sit upright for
approximately 2 hours. This will reduce the possibility of malfunctions in the cooling
system caused by handling during shipping.
IMPORTANT SAFETY INSTRUCTIONS
General Safety